The general principle of adding additional power is the addition of current with voltage.
1) the principle and it is the foundation of this installation, it is necessary to separate the influence of the first circuit of the high-voltage generator from the second circuit of the low-frequency generator
2) there are 2 coils in total and this is completely enough, the first coil is the operating voltage from the VV, and the second is the output load coil. We must apply both BB and LF to the first one.
But at the same time, the generators themselves do not affect each other in any way and should not influence
3) it really should be the earth, it doesn’t work without it, but it just starts flashing everywhere to bite BB.
4) current and voltage the principle of addition
A) on the circuit of the removal of cv we get voltages
B) the circuit is the same LF we get the current in phase

Now according to the scheme.
You can assemble on a ferm rod with any generator for 200-250 kilohertz (I'm assembling it myself at the moment)
One end is soldered to a matching capacitor, the second is planted on the ground through a removable coil
On the circuit + on the ground and minus is connected to the first end of the generator BB